This modules’ casing is made of electropolished stainless steel. It is designed with three or four compartments for 12-well cell culture inserts and is fully autoclavable at 121° C (250° F) for 20 min. Through the employment of a special adapter set , this module can also be flexibly combined for use with 24-well cell culture inserts. A constant unit temperature is guaranteed using a regulated flow of temperature-controlled water through the module. Aerosol exposure top Base module Special sealing and connection mechanisms guarantee a hermetic connection of the base module with the aerosol exposure top. The aerosol inlet-stream flows through specifically shaped Cell culture insert (12-well size) inlets. They are available in stainless steel or stainless steel with unique VITROGLIDE surface treatment for lowest adhesion results. The stainless steel / VITROGLIDE inlets are specifically designed for aerosols containing nanoparticles. The aerosol inlets are connected to the distribution or dilution systems. Extraction from the module takes place via small holes using a controlled vacuum flow. VITROCELL® calibration valves, which are connected to a vacuum pump, control flow rates effectively. The aerosol exposure top features an in/outlet for heating the water circuit, ensuring corresponding temperatures with the base module. It is made of high-quality anodized aluminum. The media can be supplied individually to each well compartment . Flexible media exchange can be static, intermittent or continuous basis. This flexibility is afforded by use of a precision media pump. This module is renowned in scientific circles for its reliability and durability. Available adaptor set for: ○ 24-well sized inserts Skin Exposure Auxiliary Equipment Dose Monitoring Racks & Carts Dilution Dose Supply Exposure Systems 29
RkJQdWJsaXNoZXIy ODIzMjIz