Skin Exposure Auxiliary Equipment Dose Monitoring Racks & Carts Dilution Dose Supply Exposure Systems Features Base module Aerosol exposure top inuscimporro Base module The base module has been designed for 48 cell culture inserts. The media is supplied individually to each well compartment . Temperature is electronically controlled at 37° C (99° F) by means of a heated base plate. Therefore, an additional incubator is not required while using this module. The base module is made of aluminum with media compartments of stainless steel. It is autoclavable at 121° C (250° F) for 20 min. This module is renowned in scientific circles for its reliability and durability. The docking station with special sealing and connection mechanisms guarantee a hermetic connection of the base module with the aerosol exposure top. The aerosol inlet-stream flows through specifically shaped inlets. They are available in stainless steel or stainless steel with unique VITROGLIDE surface treatment for lowest adhesion results. The stainless steel / VITROGLIDE inlets are specifically designed for aerosols containing nanoparticles. The aerosol inlets are connected to the distribution or dilution systems. Extraction from the module takes place via small holes using a controlled vacuum flow. VITROCELL® calibration valves, which are connected to a vacuum pump, control flow rates effectively. The aerosol exposure top features an in/outlet for heating the water circuit , ensuring corresponding temperatures with the base module. It is made of high-quality anodized aluminum and titanium. ○ Suitable for COSTAR®, FALCON® and ThinCert® 6-well sized cell culture inserts ○ Base module compartments made of stainless steel for maximum durability ○ Hyperboloid geometry of inlets for optimized particle deposition and distribution ○ Available inlet materials: stainless steel, stainless steel with unique VITROGLIDE surface treatment ○ Heating base plate with electronic control ○ An additional incubator is not required while using this module ○ Option: VITROCELL® AMES 6/48 Plus with 7th row for dosimetry (for liquid trapping or microbalance) ○ Autoclavable at 121° C (250° F) Docking station Drawer and locking mechanism Cell culture insert (6-well size) Available adaptor set for: ○ 12-well sized inserts ○ Snapwell® inserts ○ 24-well sized inserts 23
RkJQdWJsaXNoZXIy ODIzMjIz