Advanced in vitro exposure systems.

26. Sep. 2022

Product News 06-9/2022

VITROCELL® Cloud Alpha MOVE

For fully automated and repeated row-by-row exposure of 12-, 24- and 96-well sized cell culture inserts. Testing of up to 12 dose ranges in one experiment.

The VITROCELL® Cloud Alpha MOVE is our newest innovation and presents another great leap forward in fully automated exposure of cell cultures. It is the ideal device to obtain a dose-response relationship in one experiment.

VITROCELL® Cloud Alpha MOVE  (PDF)

Read more

Comments (0) Number of views (15)

21. Jun. 2022

Exposure to naphthalene and β-pinene-derived secondary organic aerosol induced divergent changes in transcript levels of BEAS-2B cells

https://doi.org/10.1016/j.envint.2022.107366

Michal Pardoa, Svenja Offerbc, Elena Hartnerbc, Sebastiano Di Bucchianicob, Christoph Bisigb, Stefanie Bauerb, Jana Pantzkebc, Elias J. Zimmermannbc, XinCaobc, Stephanie Binderbc, Evelyn Kuhnb, Anja Huberb, Seongho Jeongbc, Uwe Käferbc, Eric Schneiderc,[...]

a Department of Earth and Planetary Sciences, Faculty of Chemistry, Weizmann Institute of Science, 234 Herzl Street, POB 26, ISR-7610001 Rehovot, Israel
b Joint Mass Spectrometry Center (JMSC) at Comprehensive Molecular Analytics (CMA), Helmholtz Zentrum München, Ingolstädter Landstr. 1, D-85764 Neuherberg, Germany
c Joint Mass Spectrometry Center (JMSC) at Analytical Chemistry, Institute of Chemistry, University of Rostock, Dr.-Lorenz-Weg 2, D-18059 Rostock, Germany
d Department of Environmental and Biological Sciences, University of Eastern Finland, Yliopistonranta 1, P.O. Box 1627, FI-70210 Kuopio, Finland
e University of the Bundeswehr Munich, Institute for Chemistry and Environmental Engineering, Werner- Heisenberg-Weg 39, D-85577 Neubiberg, Germany
f Institute for Environmental Studies, Faculty of Science, Charles University, Albertov 6, CZE-12800 Prague, Czech Republic
g Department of Applied Physics, University of Eastern Finland, Yliopistonranta 1, P.O. Box 1627, FI-70210 Kuopio, Finland
h Institute of Energy and Climate Research, Troposphere (IEK-8), Forschungszentrum Jülich GmbH, Wilhelm-Johen-Str., D-52428 Jülich, Germany
i Department of Environmental Sciences, University of Basel, Klingelbergstr. 27, CH-4056 Basel, Switzerland
j Max-Delbrück-Centrum für Molekulare Medizin (MDC), Robert-Rössle-Str. 10, D-13125 Berlin, Germany
k Institute of Computational Biology, Helmholtz Zentrum München, Ingolstädter Landstr. 1, D-85764 Neuherberg, Germany
l The Mantoux Bioinformatics Institute of the Nancy and Stephen Grand Israel National Center for Personalized Medicine, Weizmann Institute of Science, Rehovot 76100, Israel

 

Read more

Comments (0) Number of views (122)

1. Jun. 2022

Product News 05-4/2022

VITROCELL® PowderX

For cell culture exposure to smallest quantities of dry powders

The VITROCELL® PowderX allows for aerosolisation of small quantities of dry powders and particle deposition on cells cultured on 12- or 24-well sized inserts. The system features biological barrier integration and continuous sampling from the basolateral compartment.

VITROCELL® PowderX  (PDF)

Read more

Comments (0) Number of views (516)

15. Apr. 2022

Aerosol–Cell Exposure System Applied to Semi-Adherent Cells for Aerosolization of Lung Surfactant and Nanoparticles Followed by High Quality RNA Extraction

https://doi.org/10.3390/nano12081362


Mélanie M. Leroux 1 , Romain Hocquel 1, Kevin Bourge 1 , Boštjan Kokot 2 , Hana Kokot 2 , Tilen Kokliˇc 2, Janez Štrancar 2, Yaobo Ding 3 , Pramod Kumar 3, Otmar Schmid 3 , Bertrand H. Rihn 1, Luc Ferrari 1 and Olivier Joubert 1
1 Institut Jean Lamour, UMR CNRS 7198, Université de Lorraine, CNRS, IJL, F-54000 Nancy, France
2 Jožef Stefan Institute, Department of Condensed Matter Physics, 1000 Ljubljana, Slovenia
3 Institute of Lung Health and Immunity, Helmholtz Zentrum München, German Research Center for Environmental Health, 85764 Neuherberg, Germany

The goal of this work was to refine an ALI pre-established protocol for the VITROCELL® Cloud 6 system. Therefore, after addressing each crucial step, (i.e., the use of very low concentrations of NP, the deposition of a homogeneous layer of surfactant, the specific use of semi-adherent cells, and finally the enhancement of the extraction yield of RNA to carry out transcriptomic studies), we present here for the first time a robust almost ready-to-use protocol. This one will be helpful for nanotoxicologists interested in developing such methodologies.

 

Read more

Comments (0) Number of views (125)

11. Apr. 2022

Product News 04-3/2022

VITROCELL® Cloud Alpha AX12

Aerosol exposure for breathing AX Lung-on-Chip

The VITROCELL® Cloud Alpha AX12 is our newest innovation in the Cloud family and presents a great leap forward in automated exposure of cell cultures with breathing function. It combines highly efficient testing with ease of use. The development is based on the well-known and frequently published VITROCELL® Cloud formats (6-, 12-, 24- and 96-well).
Its functionality enables fully automated processes with an all-in-one control unit. Everyday experiments at the Air/Liquid Interface have never been easier.

It is suitable for the nebulization of solutions and suspensions. Fields of application are, but are not limited to, screening of inhaled drugs and toxicity testing of inhaled substances such as chemicals, nanoparticles and airborne pathogens.

VITROCELL® Cloud Alpha AX 12  (PDF)

Read more

Comments (0) Number of views (781)

6. Apr. 2022

Product News 04-2/2022

VITROCELL® Smoking Machine VC 1 2.0

Manual smoking machine with high tech features

The VC 1 smoking machine is used for a controlled aerosol generation of combustion cigarettes as well as of next generation devices such as Heated Tobacco Products (HTP) and electronic nicotine delivery systems (ENDS). Special attention was given to guarantee very flexible programming of the smoking parameters. The properties of the aerosol are maintained due to small dead volumes of the system.

VITROCELL® Smoking Machine VC 1 2.0  (PDF)

Read more

Comments (0) Number of views (704)

4. Apr. 2022

Product News 04-1/2022

VITROCELL® Cloud Alpha PowerVent 

Increase of nebulizations and evacuation of residual gaseous compounds

A typical Cloud exposure allows 3 consecutive nebulizations. The PowerVent option enables an increase of the dose by adding further nebulizations. After each nebulization the humidity is removed by a short venting period before starting the new one. The venting function can be edited in the software. The PowerVent unit is delivered ready-to-use with an integrated vacuum pump.

VITROCELL® Cloud Alpha PowerVent  (PDF)

Read more

Comments (0) Number of views (369)

27. Mar. 2022

Nrf2 Responses of Commercial Cigarette Whole Smoke and Aerosol from Six Electronic Nicotine Delivery Systems (ENDS) in a 3D Human Airway Model

Poster SOT 2022, 61st Annual Meeting and ToxExpo, March 27-31, San Diego, USA

Brian M. Keyser1, John Wertman1, Michael Hollings2, Robert Bedford2, and Kristen Jordan1
1 Scientific & Regulatory Affairs, RAI Services Company, Winston-Salem, NC; 
2 Labcorp Early Development Laboratories Ltd., Harrogate, UK

In this study whole smoke from a marketed combustible cigarette and whole aerosol from four different ENDS were evaluated on cell viability and Nrf2 response in a 3D human airway model transfected with a luciferase Nrf2 promoter.
Whole aerosol was generated using a Vitrocell ® VC10® Smoke Exposure System. The tissues were exposed to whole smoke from a market combustible generated under Health Canada Intense regime.These data show that the 3D Nrf2 EpiAirway™ in vitro model can be used to assess and discriminate responses from a biomarker (oxidative stress) for disease pathways associated with tobacco product usage.

 

Read more

Comments (0) Number of views (145)

27. Mar. 2022

Cytotoxicity Assessment of Electronic Nicotine Delivery Systems (ENDS) and Combustible Cigarette Aerosols Utilizing Standard and Whole Aerosol Exposure Approaches in the Neutral Red Uptake Assay

Poster SOT 2022, 61st Annual Meeting and ToxExpo, March 27-31, San Diego, USA

Robert Leverette1, Thomas Shutsky1, John Wertman1, Katarina Aleksa2, Dhatri Lakshmanan2, Rebecca Payne3, Kristen Jordan1
1Scientific & Regulatory Affairs, RAI Services Company, Winston-Salem, NC, USA; 
2Labstat International Inc. Kitchener, ON, Canada;
3Labcorp Early Development Laboratories Ltd., Harrogate, UK

This poster shows whole aerosol exposures of combustible and next generation tobacco products, including Electronic Nicotine Delivery Systems. A Vitrocell® VC10® robot generated and delivered aerosols to the Mammalian 6/48 aerosol dilution and exposure system, with up to 7 concurrent doses plus a clean air control. Dosimetry module allowed the capture and quantification of deposited aerosol constituents (nicotine, glycerol and carbonyls). The study utilized the Neutral Red Uptake (NRU) assay in which mammalian cells were exposed to either combined TPM + GVP (submerged culture) or Whole Aerosol (ALI).

 

Read more

Comments (0) Number of views (133)

27. Mar. 2022

In Vitro Cytotoxicity Assessment of 3D Human Airway Tissue Following Exposure to Whole Aerosol/Smoke Generated from Electronic and Combustible Cigarettes

Poster SOT 2022, 61st Annual Meeting and ToxExpo, March 27-31, San Diego, USA

Thomas Shutsky1, Brian M. Keyser1, Kristen Jordan1, Michael Hollings2, and Emma Rothwell2
1Scientific & Regulatory Affairs, RAI Services Company, Winston-Salem, NC; 
2Labcorp Early Development Laboratories Ltd., Harrogate, UK

In this study, EpiAirway™ tissues were exposed to whole aerosol/smoke generated from six different Vuse Alto electronic nicotine delivery system test articles with various nicotine concentrations and a combustible cigarette. A Vitrocell® VC10® robot was used to generate whole aerosol/smoke with either a modified ISO or Health Canada Intense smoking regimen. Whole smoke/aerosol was puffed with clean air with a series of different air flows to achieve the delivered dose range. 

 

Read more

Comments (0) Number of views (130)
RSS
12345678910Last
Back to Top