VITROCELL Systems

VITROCELL® Vacuum Pump All VITROCELL® cultivation and exposure modules receive the test atmosphere by negative pressure at low flow rates. The negative pressure is taken from the in-house vacuum line or – if this is not available – by using a vacuum pump. The minimum performance of the vacuum source should be 2.0 m3 /hour (35 cf/h). The vacuum pump is connected to the vacuum distribution lines delivered with each VITROCELL® installation. Introduction The vacuum diaphragm pumps supplied by VITROCELL® have been developed and manufactured to be chemically resistant . Thus, they are suitable for aggressive or corrosive gases and vapors alike. The dry-running devices are specifically developed for laboratory applications and are maintenance-free. The pump exhaust line must be guided to a laboratory hood for proper extraction. Vacuum Pump Damping Unit for Vacuum Pump High-end solution which was specially developed by VITROCELL® for a vibration-free operation in the lab environment . It is highly recommended when the vacuum pump is located close to the exposure module, e.g. in the same extraction hood. Features ○ Compatible with all vapors and condensations ○ Chemically-resistant ○ Suitable for highly aggressive or corrosive gases ○ Maintenance-free 190

RkJQdWJsaXNoZXIy ODIzMjIz